Injection blow molding

Learning about injection blow molding:

The process of injection blow molding is somewhat similar to the extrusion blow molding process. The only exception is the former is that the injection molding process includes a metal shank or a core rod. The parison comprises a completely formed jar neck having a thick tube made out of polymer clung to it.

The preform is initially injected and then eventually cooled so that the core bottle rotates and the mold opens at position 3 so that it becomes possible for the bottle to get rejected.

There is another blow molding as well. That is injection stretch blow Moulding.

Injection Stretch Blow Moulding is the process of manufacturing high quality and durable bottles and other products. The plastic is melted and then injected into a mold to form a preform. When the preform is in the mold it is then inflated using high pressured air while simultaneously being stretched

Talking, there are triple sets of four rods that allow concurrent preform injection, ejection, and blow molding. This is used for triple blow molding procedures which is helpful for cosmetic, medical, and single-serve bottle production.

Why use plastic?

The injection blow molding process involves dual stages in all. The initial stage uses plastic parts which are also known as a preform. The traditional injection molding process is used to create that thing. Perform is the fundamental shape having precise wall thickness.

The preform is eventually transferred to the blow molding station and placed in another mold where there are specific features of the preform are combined with the blow mold cavity. Towards the Centre part, compressed air is injected while forcing the unsupported walls of the preform tube to expand.

The degree of outward by stretch depends on the distance of the end wall. As soon as the material cools down, it becomes solid and the mold is then opened to remove the solidified part.

The injection blow molding procedure is used for the production of hollow parts in which some of them are very precise. The process of injection blow molding technology is used as a part of plastic packaging and plastic bottles.


Process of plastic manufacturing for packaging material:

Injection blow molding is a combination process that includes creating an injection mold and then blowing it into the required shape. There are two molds required that help for the preform and then for the final blown mold formed.

The dual-stage blow molding procedure is versatile for standard and stretch blow molded products. In a separate stage and machine, the preform injection is molded. The preform is made to create a profile and variable wall thickness having correct mechanical and barrier properties in the final blow molding procedure.

After reheating molding the preform, it is finally placed in the blow mold. Eventually air introduction takes place with the help of a preform neck and the final stage takes place when the preform is converted into the shape of the mold.

It is very necessary to make space for the air to pass so that there is no trapped air in between the molding and the mold. The mold comes with cooling ducts incorporated in a special design. Manufacturers usually use water as a coolant to maintain a certain temperature.

Steps involved in Injection Blow Moulding :

Injection blow moulding

To manufacture bottles that are suitable for storing carbonated drinks, the mechanical properties and gas barrier of the bottle is finally changed. The burst strength of the bottle has to be greater when it comes to storing that carbonated drinks in comparison to the noncarbonated drinks.

What is a stretch blow molding procedure?

The stretch blow molding procedure is carried out on both the extrusion and injection process. The most commonly used injection procedure includes stretch blow molding in which the preheated preform is used on the stretch mold that is expected to be placed on a blow mold. Both the preform and the rod are initially heated at a controlled temperature.

During the procedure of a blow mold, the stretch rod pushes the preform to the bottom of the blow mold. The air is eventually introduced through the rod that expands the preform to a shape that is produced out of the blow mold

The process helps in producing materials that have mechanical and barrier properties. Lightweight bottles having carbon dioxide and pressure-resistant properties are produced using this particular method. One can easily obtain a better oxygen barrier by using polyamides, polyvinyl alcohol, and other similar materials.

Blow molding

The process of injection blow molding uses injection molding machines instead of an extruder to manufacture the precursor. The preform is what they produce instead of a parison. The main advantage of injection blow molding over injection stretch blow molding procedure is that the shape can be designed to acquire more uniformity and thickness.

The overall procedure consists of blowing the thermoplastic within the walls of a female mold cavity and then cooling it to create a solid find product. Blow molding companies are at a major advantage in terms of cost and performance.

Leave a comment

Your email address will not be published. Required fields are marked *